Large Reservoirs

LARGE RESERVOIR FILTRATION SYSTEMS

USPI Large Reservoir Inline Filtration systems (98D pictured left) are designed for use on large sumps and reservoirs where high flow rates are required. With the appropriate high efficency, high capacity filter elements installed for the application (hydraulic, water-glycol, fuels or gear lubes), removal of solid particulate and/or water (where applicable) is done quickly and economically.

Specifications

  • Sturdy Metal Skids
  • Chrome Plated Filter Housing(s)
  • Rigid Steel Piping
  • Oil Sample Port
  • Suction-side Sight Glass
  • Element Installation Boom
  • Flow Meter (Sized to unit): 1-50 GPM
  • Pressure Gauges
  • Pump (sized by application): 6-44 GPM
  • Motors (sized by application): 1.5-5 HP

Filter Elements sold separately

Options

  • Can be added in any combination to any model
    -H: includes heater
    -X: explosion-proof
    -W: non-caustic washdown

Downloads

USPI Filtration & FG Air 46

Click to download

Features

  • Easy installation and operation
  • Installation requires only a power source, two isolation ball valves, four compression fittings and some tubing
  • Sample probe makes taking oil samples quick and easy
  • Convects heat away from the system
  • Multi-pass depth filtration reduces particulate and water contamination
  • Filtration down to one micron (dependent upon USPI filter element chosen)
  • Can restore or bring oil to cleaner-than-new levels
  • Filter elements each hold about 60 pounds of solid and 24 quarts of water contaminants
  • Doubles oil life of mineral-based oils
  • Increases oil life tenfold when using quality USPI synthetic and semi-synthetic lubricants
  • Typically increases pump life tenfold

Units

ModelReservoirFiltersLBSW”XH”XL”

98S
601-1200 gal3* filter200 lbs20x20x55

98D
1100-19006* filters350 lbs40x40x55 OR
20x60x55

98T
1800-26009* filters750 lbs40x40x55 OR
20x80x55

98Q
2400-390012* filters950 lbs40x60x55 OR
20x100x55
* elements used in groups of 3